Home » Swimming Pool Repairs Gauteng » Swimming Pool Repairs Pretoria

Pool Repairs in Pretoria: Leaks, Plumbing, Cracks and Pumps Fixed at the Source

Pool repairs in Pretoria, fixed at the source. Crispy Pools finds what is really wrong with your pool, whether it is a leak, a crack, a failing pipe or a tired pump, and repairs it properly so you stop topping up, patching and paying twice.

We repair concrete and fibreglass pools across Pretoria, from Pretoria East to Pretoria North. We diagnose first, repair only what is needed and test the work before we call it done. Chris supervises the work on site, we store your treated water in our own bladders when a repair means emptying the pool, and you receive a free written quote with no obligation.

Not sure where your water is going? Start with pool leak detection in Pretoria. Facing several problems at once? See our pool renovations in Pretoria.

Repair or renovate? A quick guide

Not every problem means a new pool surface. The question is how many things have gone wrong, and where.

A repair is the right answer when the fault is isolated and the rest of the pool is sound: a leaking pipe, a damaged fitting, a single crack, a patch of worn surface or a faulty pump, filter or valve. We keep the work to the fault and leave sound work around it alone.

A bigger job is the better answer when a pool has several faults in different places, a worn surface throughout, a shell that keeps moving or a history of repairs that haven’t lasted. At that point you are paying to treat the symptoms of a tired pool. Our pages on pool resurfacing in Pretoria and pool renovations in Pretoria cover the larger options.

Either way, we explain what each fault needs and let you decide.

Pool leak, plumbing and fitting repairs in Pretoria

A pool that is losing water may have a leaking pipe, a failing fitting, a structural problem, a damaged surface or more than one leak at once. Finding the source is a job of its own, covered on our pool leak detection in Pretoria page. This section covers the repair that follows. For the general question of why a pool loses water, see our guide to a pool losing water.

Underground pool pipes

Suction and return lines run beneath paving, lawn and concrete, and a failed length stays hidden until the ground turns soggy or the pump draws air. Once the fault has been located, we aim to open only the affected section, repair or replace the failed length and reconnect the line, so that paving and landscaping aren’t disturbed more than they need to be.

Pump-to-pool pipework, valves and connections

Pipework between the pump room and the pool takes knocks and wear at its joints, bends, unions and valves. We repair the damaged section, replace failed connections and test the line before it is covered up again.

Skimmers, weirs, returns and other fittings

Where a fitting passes through the pool wall, the seal between it and the concrete can open with age or movement. We re-seal the joint or replace the fitting, then check that water is no longer escaping. Damp, soft or sagging paving beside a skimmer box is a classic sign of a cracked weir body leaking into the ground, and it deserves attention early.

Coping and pool edges

Loose or damaged coping is more than a cosmetic problem, because the edge beneath it often needs repair too. We repair the affected coping and edge together so the repair holds and blends with the work around it.

When there is more than one leak

A pool can leak in more than one place, and fixing the first leak can reveal the next. We keep checking until the level holds, and we don’t call the job finished until the loss has stopped.

Crack, Marbelite and fibreglass repairs in Pretoria

A cracked or worn surface doesn’t automatically mean the whole pool has to be resurfaced. We establish how far the damage goes and whether the surface around it is sound, then repair what needs repairing.

Cracks in the pool shell

A small surface crack and a structural crack call for very different repairs. Where a crack is a sign of movement, we repair the structure underneath rather than filling the line you can see. That means steel stitching and structural resin, followed by a finish that blends with the rest of the pool. For serious cracking or movement, see our page on structural pool crack repair in Pretoria.

Marbelite repairs

Marbelite can develop loose, hollow, chipped or deteriorated patches. Where the surface around the damage is sound, we cut back the affected area, make good the shell beneath and re-apply the finish so that it blends in. More about this is on our Marbelite pool repair page. If the whole surface is failing, resurfacing is better value, and our pool resurfacing in Pretoria page explains the options.

Fibreglass repairs

Fibreglass linings can develop problems around cracks, fittings, edges and damaged sections. We grind back to sound material and rebuild the damaged area with matched resin, matting and gelcoat. Blisters, bulging or lifting fibre suggest the problem may be deeper, so we assess whether a local repair is enough or the lining needs more.

When a repair is not enough

One Pretoria East school pool had structural cracks through its concrete shell, heavy wear and algae staining, and it was leaking persistently. Repairing the cracks and the surface one at a time would not have lasted, so we repaired the shell first and then converted the pool to fibreglass. When faults stack up like that, the larger job is the better value, and we will tell you so.

Pool pump, filter and equipment repairs in Pretoria

A pool can have a sound shell and still fail to run properly because of its equipment. We find the part responsible, then tell you honestly whether repairing it or replacing it is the better value.

Quick diagnosis: what your pool is telling you

These signs help narrow down the cause before anyone arrives:

The pump is silent, humming loudly or clicking without starting. This often points to an electrical fault such as a failed capacitor, and electrical faults belong with a registered electrician.
Air bubbles show in the pump lid or blow out of the returns. Air in the system usually means a suction-side leak at a union, a lid seal or a pipe.
Water runs out of the waste pipe while the filter is set to filter. A worn gasket inside the multiport valve is the likely cause.
The pool cleaner has stopped moving even after a backwash. The cause is often old, calcified filter sand or low suction pressure.
Paving around the skimmer is damp, soft or sagging. A cracked weir body may be leaking into the ground.
The pump is loud, grinding or screeching. Worn bearings or seals are the usual cause, and ignoring them risks a total failure.

Pool pumps

A noisy, weak or failing pump affects circulation and filtration, and the water suffers. We repair worn bearings and seals, trace and fix suction leaks, and replace pumps that are past repair. See our page on pool pump repair and installation.

Pool filters and valves

A damaged or poorly working filter affects both water quality and circulation. We repair leaking seals and valves, correct multiport faults and renew filter sand and internal parts. See our page on pool filter replacement.

Timers and controls

A faulty timer or an outdated control setup can stop the equipment running when it should. We fix or replace timers and, where it suits you, upgrade to controls you can run from your phone. See our smart pool systems.

Repair or replace?

Sometimes repairing old equipment is no longer practical. When a pump or filter has reached the end of its service life, we recommend an efficient replacement instead of repairing it again and again, and we will show you why.

How a Crispy Pools repair works in Pretoria

The visible symptom isn’t always the real problem, so we follow a fixed order.

You tell us what you’ve noticed. A short description and a few photos often narrow things down before we arrive.
We inspect the pool. The shell, surface, plumbing and equipment tell us where to focus, and we don’t assume the whole pool needs work.
We find the actual fault. Water loss, cracks, poor circulation and equipment failure each need a different investigation, so we choose the right one.
You receive a clear explanation and a written quote before any work starts.
We repair the fault and keep the work focused on it.
We test the repair and check that the level holds and the equipment runs as it should.

How long does a repair take?

Most standard repairs take 1 to 3 days, depending on the problem. Structural repairs, fibreglass relining and resurfacing take longer, typically 5 to 7 working days. Your written quote states the timeline for your pool.

What affects the cost of a pool repair in Pretoria

Repair prices vary because faults do. This is what moves the number:

What has failed and how big the fault is. A weeping union costs far less than a crack in a deep floor.
How hard it is to find and reach. A faulty valve at the pump takes minutes. A buried pipe under paving takes longer.
Whether the pool must be lowered or emptied to reach the fault.
Materials and equipment. Steel stitching, resin, fittings and pumps each carry their own cost.
Site access, including estate contractor rules.

A free assessment ends the guesswork, with the cause, the fix and a written quote before work starts. For typical figures, see our page on pool renovation and repair costs in Pretoria.

Delay is rarely cheap. Water keeps escaping while a leak runs, a crack lengthens as the ground moves, and a failing pump can damage the parts around it.

Water storage when a repair needs the pool emptied

Some repairs can’t be done while the pool is full. Where the repair and the pool allow it, we use our own temporary storage bladders to hold your existing water while the work is carried out, so it isn’t wasted and you aren’t refilling a whole pool from the tap. Because the bladders belong to Crispy Pools, there is no separate bladder rental fee. Whether storage suits a particular repair depends on the work and the pool, and we confirm it at your assessment.

Why Pretoria homeowners call Crispy Pools for repairs

The repair matches the fault. Where a targeted repair makes sense, we do that. Where a pool needs more, we explain why.
15+ years of construction and pool renovation experience, including difficult repair and restoration projects.
Chris personally supervises projects, keeping what was assessed, what was recommended and what was done on site connected.
Experience beyond the surface. Our work includes structural repairs, plumbing, leak investigation, fibreglass, Marbelite and equipment.
A written workmanship warranty on every project. Ask Chris to walk you through exactly what it covers before you decide.
Estate-ready. We follow each estate’s contractor access, security and working-hour rules.

Where we repair pools in Pretoria

Pretoria East:

Silver Lakes, Hazeldean, Mooikloof, Moreleta Park, Faerie Glen, Garsfontein, Lynnwood, Menlyn and surrounding areas.

Pretoria North:

Montana, Sinoville, Wonderboom, Annlin, Doornpoort and surrounding areas.

Pretoria Central, Moot and West:

Arcadia, Rietondale, Villieria, Queenswood, Gezina, Wonderboom South, Pretoria West and surrounding areas.

Selected jobs in Centurion

and its surrounds.

If your suburb isn’t listed, message us. We work across Gauteng.

High-Impact Pool Repair Checklist

If your pool system is acting up, check for these warning signs before calling us out:

Is the pump motor completely silent, humming loudly, or clicking without starting?(Indicates a capacitor or electrical failure)
Are there constant air bubbles visible through the clear pump lid or blowing out the returns?(Indicates a suction leak on the weir or pipe lines)
Is water running out of your waste pipe while the filter handle is set to “Filter”?(Indicates a worn spider gasket inside your multiport valve)
Has your pool cleaner stopped moving even after you backwashed the filter?(Indicates old, calcified filter sand or low suction pressure)
Is the paving around your skimmer box damp, soft, or starting to sag?(Indicates a cracked weir body leaking into the subsoil)

Book your free Pretoria pool repair assessment

A small fault caught early is always cheaper than a big one found late. Chris and the team will find the cause, explain the repair in plain English and give you a written quote, free and with no pressure.

WhatsApp: 076 328 9545
Call: 076 328 9545
Email: sales@crispypools.co.za

For a head start, send your suburb or estate, a photo of the damage or the damp area, a photo of the pump room and a few lines on what you have noticed. We can usually give you a first opinion before we visit.

Pool repairs in Pretoria: your questions answered

How much do pool repairs cost in Pretoria?

It depends on what has failed, how hard it is to reach and whether the pool must be emptied. Minor jobs such as pump servicing or a small plumbing repair cost far less than structural crack repair. Our page on pool renovation and repair costs in Pretoria shows typical figures, and a free assessment gives you an exact written quote.